changeset 659:55d6697b975a

help: add an rst file containing some helpful instructions The new file contains three sections: The first one is based on the README and contains instructions on how to use hgsubversion. The second one mentions the most notable shortcomings of hgsubversion. The third and final section documents how to customise hgsubversion.
author Dan Villiom Podlaski Christiansen <danchr@gmail.com>
date Wed, 11 Aug 2010 19:57:34 +0200
parents d101b39f6c51
children 67b54cb38843
files hgsubversion/help/subversion.rst setup.py
diffstat 2 files changed, 181 insertions(+), 0 deletions(-) [+]
line wrap: on
line diff
new file mode 100644
--- /dev/null
+++ b/hgsubversion/help/subversion.rst
@@ -0,0 +1,180 @@
+Basic Use
+---------
+
+Converting a Subversion repository to Mercurial with hgsubversion is done by
+cloning it. Subversion repositories are specified using the same, regular URL
+syntax as Subversion uses. hgsubversion accepts URIs such as the following:
+
+- http://user:sekrit@example.com/repo
+- https://user@example.com/repo
+- svn://example.com/repo
+- svn+ssh://example.com/repo
+- file:///tmp/repo
+
+In the case of the two first schemas, HTTP and HTTPS, the repository is first
+treated as a Mercurial repository, and a Subversion pull attempted should it
+fail. As this can be particularly annoying for repositories that require
+authentication, such repositories may also specified using a svn+http or
+svn+https schema.
+
+To create a new Mercurial clone, you can use a command such as the following::
+
+ $ hg clone <repository URI> [destination]
+
+Or with a real example::
+
+ $ hg clone http://python-nose.googlecode.com/svn nose-hg
+
+Please note that there are two slightly different ways of cloning repositories:
+
+The most common desire is to have the full history of a repository, including
+all its tags and branches. In such cases you should clone from one level above
+trunk, as in the example above. This is known as `standard layout`, and works
+with repositories that use the conventional `trunk`, `tags` and `branches`
+directories. By default, hgsubversion will use this layout whenever it finds any
+of these directories at the specified directory on the server.
+
+If you instead want to clone just a single directory or branch, clone the
+specific directory path. In the example above, to get *only* trunk, you would
+issue :hg:`clone http://python-nose.googlecode.com/svn/trunk nose-trunk`. This
+works with any directory with a Subversion repository, and is know as a single
+directory clone.
+
+Pulling new revisions into an already-converted repo is the same as from any
+other Mercurial source. Within the first example above, the following three
+commands are all equivalent::
+
+ $ hg pull
+ $ hg pull default
+ $ hg pull http://python-nose.googlecode.com/svn
+
+Sometimes, past repository history is of little or no interest, and all that is
+wanted is access to current and future history from Mercurial. The --startrev
+option with the HEAD argument causes the initial clone to only convert the
+latest revision; later pulls will convert all revisions following the first.
+Please note that this only works for single-directory clones.
+
+Support for externals
+-----------------------------
+
+All ``svn:externals`` properties are serialized into a single
+``.hgsvnexternals`` file having the following syntax::
+
+  [.]
+   common1 http://path/to/external/svn/repo1
+   ...additional svn:externals properties lines...
+  [dir2]
+   common2 -r123 http://path/to/external/svn/repo2
+   ...additional svn:externals properties lines...
+
+A header line in brackets specifies the directory the property applies
+to, where '.' indicates the project root directory. The property content
+follows the header, with every content line being prefixed by a single
+space. Note that the property lines have a format identical to
+svn:externals properties as used in Subversion, and do not support the
+hgsubversion extended svn+http:// URL format.
+
+Issuing the command :hg:`svn updateexternals` with the ``.hgsvnexternals``
+example above would fetch the latest revision of repo1 into the subdirectory
+*./common1*, and revision 123 of repo2 into *dir2/common2*.  Note that 
+``.hgsvnexternals`` must be tracked by Mercurial before this will work.  If
+``.hgsvnexternals`` is created or changed, it
+will not be pushed to the related Subversion repository, but its
+contents **will** be used to update ``svn:externals`` properties on the
+related Subversion repository.
+
+Limitations
+-----------
+
+Currently, pushing to Subversion destroys the original changesets and replaces
+them with new ones converted from the resulting commits. Due to the intricacies
+of Subversion semantics, these converted changesets may differ in subtle ways
+from the original Mercurial changests. For example, the commit date almost
+always changes. This makes hgsubversion unsuitable for use as a two-way bridge.
+
+When converting from Subversion, hgsubversion does not recognize merge-info, and
+does not create merges based on it. Similarly, Mercurial merges cannot be pushed
+to Subversion.
+
+Changesets that create tags cannot be pushed to Subversion, as support for
+creating Subversion tags has not been implemented, yet.
+
+Standard layout does not work with repositories that use unconventional
+layouts. Thus, only a single directory clones can be made of such repositories.
+
+When interacting with Subversion, hgsubversion relies on information about the
+previously converted changesets. This information will not be updated if pushing
+or pulling converted changesets to or from any other source. To regenerate the
+stored metadata, run :hg:`svn rebuildmeta [URI]`. This must also be done if any
+converted changesets are ever removed from the repository.
+
+It is not possible to interact with more than one Subversion repository per
+Mercurial clone. Please note that this also applies to more than one path within
+a repository.
+
+Advanced Configuration
+----------------------
+
+The operation of hgsubversion can be customized by the following configuration
+settings:
+
+  hgsubversion.authormap
+    Path to a file for mapping usernames from  Subversion to Mercurial. For
+    example::
+
+      joe = Joe User <joe@example.com>
+
+  hgsubversion.defaulthost
+    This option specifies the hostname to append to unmapped Subversion
+    usernames. The default is to append the UUID of the Subversion repository
+    as a hostname. That is, an author of `bob` may be mapped to
+    `bob@0b1d8996-7ded-4192-9199-38e2bec458fb`.
+
+    If this option set to an empty string, the Subversion authors will be used
+    with no hostname component.
+
+  hgsubversion.defaultauthors
+    Setting this boolean option to true will cause hgsubversion to abort a
+    conversion if a revision has an author not listed in the author map.
+
+  hgsubversion.branchmap
+    Path to a file for changing branch names during the conversion from
+    Subversion to Mercurial.
+
+  hgsubversion.filemap
+    Path to a file for filtering files during the conversion. Files may either
+    be excluded or included. See the documentation for :hg:`convert` for more
+    information on filemaps.
+
+  hgsubversion.username, hgsubversion.password
+    Set the username or password for accessing Subversion repositories.
+
+  hgsubversion.stupid
+    Setting this boolean option to true will force using a slower method for
+    pulling revisions from Subversion. This method is compatible with servers
+    using very old versions of Subversion, and hgsubversion falls back to it
+    when necessary.
+
+The following options only have an effect on the initial clone of a repository:
+
+  hgsubversion.layout
+    Set the layout of the repository. `standard` assumes a normal
+    trunk/branches/tags layout. `single` means that the entire repository is
+    converted into a single branch. The default, `auto`, causes hgsubversion to
+    assume a standard layout if any of trunk, branches, or tags exist within the
+    specified directory on the server.
+
+  hgsubversion.startrev
+    Convert Subversion revisions starting at the one specified, either an
+    integer revision or HEAD; HEAD causes only the latest revision to be pulled.
+    The default is to pull everything.
+
+  hgsubversion.tagpaths
+    Specifies one or more paths in the Subversion repository that
+    contain tags. The default is to only look in `tags`. This option has no
+    effect for single-directory clones.
+
+Please note that some of these options may be specified as command line options
+as well, and when done so, will override the configuration. If an authormap,
+filemap or branchmap is specified, its contents will be read and stored for use
+in future pulls.
--- a/setup.py
+++ b/setup.py
@@ -116,6 +116,7 @@ setup(
                                          'README')).read(),
     keywords = 'mercurial',
     packages = ('hgsubversion', 'hgsubversion.svnwrap'),
+    package_data = { 'hgsubversion': ['help/subversion.rst'] },
     platforms = 'any',
     install_requires=requires,
     classifiers = [